[PSUBS-MAILIST] hard tank

[hank pronk]

Hi Brian,
I have the exact same issue with my Nekton sub.  I have limited access, but I plan to pour paint inside the mbt and roll the sub so the paint can coat where I have welded.  
Hank 

From: brian <brian at ojaivalleybeefarm.com>
To: personal_submersibles at psubs.org 
Sent: Tuesday, August 27, 2013 2:43:56 PM
Subject: [PSUBS-MAILIST] hard tank



Hi All,
                Very jealous I can't make it to the convention ;-)  !!   I'm going to have a hard ballast tank which will be approx 21" in diameter by 36" long.  I don't  really need to access the inside of the tank and I was wondering how I could seal the inside somehow.  Some type of epoxy coating.  But once I do any welding it will desrtoy any coating.  Any ideas ?  

Thanks,    Brian  
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20130827/0d7369e1/attachment-0001.html>