Re: [PSUBS-MAILIST] Motor housing

[Jon Wallace <jonw@psubs.org>]

I'm going to need a much larger screwdriver.  The flat-heads are in 
tight and I don't want to strip the slot.  I checked the round heads 
holding the motor to the plate and those will come off fine.

Jon


On 10/25/2011 5:09 PM, Vance Bradley wrote:
> The flat head screws bolt through to d tabs. Unscrew them and the motor and  mounting plate come out together.
> Vance



************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
	removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.

PSUBS.ORG
PO Box 53
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************