[PSUBS-MAILIST] Divelink Comms

[James Frankland <jamesf@guernseysubmarine.com>]

Hi all,

 

Im pretty sure im going to buy 2 x the Divelink COM-S01R UW radios.

 

One unit will go on my boat with the transducer mounted to the transom (or possibly even just dangled over the side), the other will fit inside the sub.  The transducer cable has a 2 wire connection which im 90% sure will work if spliced through the BBH4F low power bulkhead connection that i have already fitted..

 

This is an expensive purchase but i feel neccesary for the waters around here.  The other 2 pins on the bulkhead connector im going to use for the depth sounder transducer.

 

The COM-S01R commes in at $1042 each.

 

Before i spend this, anyone have any tips, advice, horror stories?  Something better to use??

 

I seem to remember Alec using one in one of the videos.

 

Kind Regards

James