[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] Scuba tank hook up



Sorry for the omission. The Tanks will be external and all I would need is HP. I have
regulators inside and the ability to crank em up to 250 psi. I guess what I am looking for
is yoke type with out the regulator.
 
Dean
 
In a message dated 8/19/2010 11:26:37 A.M. Central Daylight Time, vbra676539@aol.com writes:
External or internal? And are you set up for high pressure or not? HP air can be had with a simple yoke (like a first stage without the regulator). If you need lower pressure, then the first stage will work fine. George carried his internally, which was an issue at depth because scuba first stages can only be cranked up to about 150-160 pounds. Externally, you get that over ambient, which gives you full flow. The only other issue is flow. The 1st stage arrangement is pretty slow.
Vance



-----Original Message-----
From: Recon1st@aol.com
To: personal_submersibles@psubs.org
Sent: Thu, Aug 19, 2010 12:03 pm
Subject: Re: [PSUBS-MAILIST] Scuba tank hook up

What have any of you done to hook up standard SCUBA tanks for HP air source.
Originally I was using a large steel tank. It is just too heavy to handle and I am
switching to twin Aluminum 100 tanks.
 
I am thinking a scuba first stage regulator is used with an adaptor at the thru hull
connection.
 
Appreciate any help
 
Dean