I found some valves and I was wondering if they would work for the 3/4 VBT flood valve. They are Mueller 107-405HC. They are rated CSA certified to 600 psi. From my calculations my subs crush depth (1000') is roughly 500psi which sould mean these valves should work. Could someone double check me and tell me if you see some problems with this?
Thanks,
Scott Waters
Date: Tue, 13 Jul 2010 16:34:31 +0100
Subject: Re: [PSUBS-MAILIST] troubles with vavle
From: james@guernseysubmarine.com
To: personal_submersibles@psubs.org
Hi scott. I had some trouble getting it to start with, but it is still available.
I called them and spoke for some time with the guy. He eventually came up with the correct one for me.
I still have the documentation for these, so i can look up the exact part code if you like. There must be a distributor wherever you are.
Kind regards
James
In the K-350 blue prints, the VBT calls for a 1"-466TSE Worcester Valve. I have serched on the google and looked at Mcmaster Carr, and can't find anything that matches up to those numbers. Any help? Thanks, Scott Waters
Hotmail has tools for the New Busy. Search, chat and e-mail from your inbox. Learn more.
The New Busy is not the old busy. Search, chat and e-mail from your inbox. Get started.
|