RE: [PSUBS-MAILIST] Fiberglass hulls

["Brian V. Ryder" <brian@subatlantic.com>]

I will be there,  

Below is my new pressure transducer it’s a solder sucker from radio shack filled with oil seems to work pretty well have one for inside to show increase in cabin pressure closing the door in a room makes it fluctuate and one outside showing feet of H2o

 

Brian V. Ryder

brian@subatlantic.com

 

CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information or otherwise be protected by law. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.

 

From: owner-personal_submersibles@psubs.org [mailto:owner-personal_submersibles@psubs.org] On Behalf Of greg cottrell
Sent: Friday, June 04, 2010 6:31 PM
To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] Fiberglass hulls

 

Cool! That's two subs already! Anyone else? That's a whole year to build a sub if you start now.

 

Greg

--- On Fri, 6/4/10, vbra676539@aol.com <vbra676539@aol.com> wrote:

From: vbra676539@aol.com <vbra676539@aol.com>
Subject: Re: [PSUBS-MAILIST] Fiberglass hulls
To: personal_submersibles@psubs.org
Date: Friday, June 4, 2010, 2:57 PM

I'll be there.

Vance

 

-----Original Message-----
From: greg cottrell <jgcottrell2002@yahoo.com>
To: personal_submersibles@psubs.org
Sent: Fri, Jun 4, 2010 1:47 pm
Subject: Re: [PSUBS-MAILIST] Fiberglass hulls

No. Building a sub is required. If we all start tomorrow, there will be over 200 subs at the 2011 convention. Who's with me?!!!

 

 

--- On Fri, 6/4/10, Marc de Piolenc <piolenc@archivale.com> wrote:

From: Marc de Piolenc <piolenc@archivale.com>
Subject: Re: [PSUBS-MAILIST] Fiberglass hulls
To: personal_submersibles@psubs.org
Date: Friday, June 4, 2010, 1:13 PM

On 6/4/2010 9:46 PM, greg cottrell wrote:
> I can't argue personal preference either. But I'll leave you with this
> question:
> Would it be better for psubs to be about discussions of "cutting edge"
> technology?
> or about building more subs using affordable materials and proven methods?

You mean there's not enough room for both?

Marc



************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
    removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.

PSUBS.ORG
PO Box 53
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************