[PSUBS-MAILIST] cutting and pasting

["Brian Cox" <ojaivalleybeefarm@dslextreme.com>]

Hi All,
          I'm having a bit of a delema deciding wheather or not to go with
either 3/8" thick hull or 1/4" hull.  I'm thining that initially maybe I
should go with the 1/4" now (so I can get this off the ground) mainly due to
budget constraints and then at a later date upgrade to the thicker hull,
which would take me deeper.  My question is how hard would it be to cut out
the conning tower( 3/4" thick) from the 1/4" hull and paste it on to a 3/8"
thick hull at a later date? Would I need to grind out all of the weld seam?
And would that adversly effect the metal in that area by rewelding?

Thanks,  Brian




************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
	removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.

PSUBS.ORG
PO Box 53
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************