[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PSUBS-MAILIST] Lubrication

To: personal_submersibles@psubs.org
Subject: [PSUBS-MAILIST] Lubrication
From: "kocpnt tds.net" <kocpnt@tds.net>
Date: Tue, 2 Feb 2010 13:45:05 -0600
Reply-to: personal_submersibles@psubs.org
Sender: owner-personal_submersibles@psubs.org

Hi All,

I've not seen this before and am hoping for some expereinced people to help.

I am doing final assembly of some rotating shafts. Some are carbon steel inside of carbon steel and some are Stainless shaft inside of bronze bushings.

I am not sure if never- seize or a good quality urea grease are better or possibly something that I have not thought of!

Thanks in advance,

Jim K

Follow-Ups:
- RE: [PSUBS-MAILIST] Lubrication
  - From: "Greg Cottrell" <greg@precisionplastics.com>
- RE: [PSUBS-MAILIST] Lubrication
  - From: "Greg Cottrell" <greg@precisionplastics.com>
- RE: [PSUBS-MAILIST] Lubrication
  - From: "Hugh Fulton" <hc.fulton@gmail.com>

Prev by Date: Re: [PSUBS-MAILIST] Electric Actuators on "Git Kraken"
Next by Date: RE: [PSUBS-MAILIST] Lubrication
Previous by thread: Re: [PSUBS-MAILIST] Electric Actuators on "Git Kraken"
Next by thread: RE: [PSUBS-MAILIST] Lubrication
Index(es):
- Date
- Thread