RE: [PSUBS-MAILIST] Eurosub in the Americas

[MerlinSub@t-online.de]

http://materials-welding.blogspot.com/2009/06/mw2498-re-equalant-api-material.html

1.0570

exits in this table two times : 

http://www.zyxtek.se/steel_eng.htm


vbr Carsten 


"Hugh Fulton" <hc.fulton@gmail.com> schrieb:
> Hi Paul,
> 
> Equivalent is A516 Gr 70   
> 
>  
> 
> Grades and equivalents table:
> 
> 
> ASME
> 
> ASTM
> 
> DIN17155
> 
> EN10028
> 
> BS1501
> 
> 
>  
> 
>  
> 
>  
> 
> Name
> 
> Number
> 
>  
> 
> 
> SA 516 60
> 
> A 516 60
> 
> HII
> 
> P265GH
> 
> 1.0425
> 
> 161 430A
> 
> 
> SA 516 65
> 
> A 516 65
> 
> 17Mn4
> 
> P295GH
> 
> 1.0481
> 
>  
> 
> 
> SA 516 70
> 
> A 516 70
> 
>  
> 
> P355GH
> 
>  
> 
> 224-490 A & B
> 
>  
> 
> Any sub made from 516 Gr70 will be OK
> 
>  
> 
> Regards,   Hugh
> 
> From: owner-personal_submersibles@psubs.org
> [mailto:owner-personal_submersibles@psubs.org] On Behalf Of Emile van Essen
> Sent: Saturday, 9 January 2010 12:09 p.m.
> To: personal_submersibles@psubs.org
> Subject: RE: [PSUBS-MAILIST] Eurosub in the Americas
> 
>  
> 
> Hi Paul,
> 
>  
> 
> There will probably be  tables to compare the steel.
> 
> The 355 stands for the yield strength in N/mm2  (Ultimate tensile strength
> 520 N/mm)  It is very common steel ; exotic material will make the sub more
> expensive and probably more difficult to weld.
> 
> Lower or higher yield strength decrease or increase the dive depth.
> 
>  
> 
>  
> 
> Pipes are even here in Inch sizes! The other problem is that you need just
> very short pieces and you have to buy lengths. Go with rolled plate!.
> 
>  
> 
> Regards, Emile
> 
>  
> 
>   _____  
> 
> Van: owner-personal_submersibles@psubs.org
> [mailto:owner-personal_submersibles@psubs.org] Namens lassen@rosebud.ca
> Verzonden: vrijdag 8 januari 2010 23:02
> Aan: personal_submersibles@psubs.org
> Onderwerp: [PSUBS-MAILIST] Eurosub in the Americas
> 
>  
> 
> Hello All,
> 
>  
> 
> I am trying to evaluate the prospect of building the new Eurosub here in
> Canada. Does anyone know if an ASME or ASTM equivalent exists for the steel
> that this sub is made of? It is S355J2, a German standard if I'm not
> mistaken. How might I account for any differences in thickness, overall pipe
> / end cap diameter and steel engineering properties if I hope to build this
> sub which uses metric pipe sizes and a steel standard that I don't believe
> is available here either.
> 
>  
> 
> Cheers,
> 
>  
> 
> Paul
> 




************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
	removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.

PSUBS.ORG
PO Box 53
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************