[
Date Prev
][
Date Next
][
Thread Prev
][
Thread Next
][
Date Index
][
Thread Index
]
Re: [PSUBS-MAILIST] No Machining Hatch Sealing Concept
To
:
personal_submersibles@psubs.org
Subject
: Re: [PSUBS-MAILIST] No Machining Hatch Sealing Concept
From
:
ShellyDalg@aol.com
Date
: Mon, 7 Sep 2009 19:45:58 EDT
Reply-to
:
personal_submersibles@psubs.org
Sender
:
owner-personal_submersibles@psubs.org
In a message dated 9/7/2009 3:33:05 P.M. Pacific Daylight Time, jonw@psubs.org writes:
http://www.psubs.org/mlist/archive/9905/msg00070.html
Jeez I wish
everyone
was bright enough to understand that concept.
Frank D.
Prev by Date:
[PSUBS-MAILIST] Braking the Groove Outside Corners
Next by Date:
RE: [PSUBS-MAILIST] Testing a home built sub.
Previous by thread:
[PSUBS-MAILIST] Braking the Groove Outside Corners
Next by thread:
Re: [PSUBS-MAILIST] Psub site picture upload
Index(es):
Date
Thread