[
Date Prev
][
Date Next
][
Thread Prev
][
Thread Next
][
Date Index
][
Thread Index
]
Re: [PSUBS-MAILIST] O-ring tutorial
To
:
personal_submersibles@psubs.org
Subject
: Re: [PSUBS-MAILIST] O-ring tutorial
From
:
vbra676539@aol.com
Date
: Mon, 07 Sep 2009 19:19:36 -0400
In-reply-to
: <
d08.610e1f0e.37d6e648@aol.com
>
References
: <
d08.610e1f0e.37d6e648@aol.com
>
Reply-to
:
personal_submersibles@psubs.org
Sender
:
owner-personal_submersibles@psubs.org
No, I have it, thanks. Was just looking at the specs for O-ring grooves (specfic to our hatch applications). It's all there. Vance
-----Original Message-----
From: ShellyDalg@aol.com
To: personal_submersibles@psubs.org
Sent: Mon, Sep 7, 2009 6:42 pm
Subject: Re: [PSUBS-MAILIST] O-ring tutorial
Vance....If you can't get it, let me know and I'll print the copy I have and mail it to you. Frank D.
References
:
Re: [PSUBS-MAILIST] O-ring tutorial
From:
ShellyDalg@aol.com
Prev by Date:
[PSUBS-MAILIST] Tight or Loose O-ring Grooves
Next by Date:
Re: [PSUBS-MAILIST] Tight or Loose O-ring Grooves
Previous by thread:
Re: [PSUBS-MAILIST] O-ring tutorial
Next by thread:
[PSUBS-MAILIST] Persubs for Everyone / Article
Index(es):
Date
Thread