The big buggle front end on the PC-1402 that Mike Stahle called Vista Ranger cost 50 grand per section, that's fifty for the cylinder, 50 for the dome and 50(ish) more for all the welding and structural work to support the thing. I believe the Antibodes dome segments were comparably priced. Did you want to put your order in tonight, or wait until tomorrow?
Vance
-----Original Message-----
From: Cody McMillan <cody_mcmillan@hotmail.com>
To: personal_submersibles@psubs.org <personal_submersibles@psubs.org>
Sent: Mon, Aug 31, 2009 7:50 pm
Subject: RE: [PSUBS-MAILIST] cast dome cost
if those small domes cost 26k... i wonder what MASSIVE dome on his first deep work submersible...
Cody McMillan
Marine Engineer
6046573770
From:
lanceind@earthlink.net
To:
personal_submersibles@psubs.org
Subject: RE: [PSUBS-MAILIST] cast dome cost
Date: Mon, 31 Aug 2009 19:31:01 -0400
I think Phil Nuyten once told us that a 26 inch diameter dome for a Deep Worker cost about $26,000.00 Even a blown dome will cost more than $1200.00
----- Original Message -----
Sent: 8/31/2009 3:44:16 PM
Subject: RE: [PSUBS-MAILIST] cast dome cost
Brent, I think that would be for a blown dome. For a cast dome I forget the number but it was WAY more than that I'm afraid.
The contents of this e-mail are intended for the named addressee only. It contains information that may be confidential. Unless you are the named addressee or an authorized designee, you may not copy or use it, or disclose it to anyone else. If you received it in error please notify us immediately and then destroy it.
Hi Alan,
The numbers I keep hearing are around $1000 to $1200 US funds.
Sent: Friday, August 28, 2009 2:39 PM
Subject: [PSUBS-MAILIST] cast dome cost
Hi people,
Can anyone give me an indication of what a cast acrylic dome costs.
Something round the size of a K250 dome, 24" x 1" thick.
Or any dome that you know the dimentions of.
Thanks Alan
Less clicking: Hotmail access on the new
MSN homepage. =