[
Date Prev
][
Date Next
][
Thread Prev
][
Thread Next
][
Date Index
][
Thread Index
]
Re: [PSUBS-MAILIST] Double Seal Requirements of PVHO Certified Viewports
To
:
personal_submersibles@psubs.org
Subject
: Re: [PSUBS-MAILIST] Double Seal Requirements of PVHO Certified Viewports
From
:
ShellyDalg@aol.com
Date
: Fri, 24 Jul 2009 11:26:51 EDT
Reply-to
:
personal_submersibles@psubs.org
Sender
:
owner-personal_submersibles@psubs.org
Hi Brian, so you really have three seals? the retaining ring gasket, the O ring, and the base flange gasket? That should seal it up! see if you can post a link to the picture you mentioned on the psub site. Frank D.
Follow-Ups
:
RE: [PSUBS-MAILIST] Double Seal Requirements of PVHO Certified Viewports
From:
"Brian Cox" <ojaivalleybeefarm@dslextreme.com>
Prev by Date:
RE: [PSUBS-MAILIST] water level
Next by Date:
Re: [PSUBS-MAILIST] water level
Previous by thread:
Re: [PSUBS-MAILIST] Double Seal Requirements of PVHO Certified Viewports
Next by thread:
RE: [PSUBS-MAILIST] Double Seal Requirements of PVHO Certified Viewports
Index(es):
Date
Thread