|
Hi Vance, The sub has been
sandblasted and I paint it in zinc primer. Indeed little time for
updates but I post pictures when it has its final paint! Emile Van: owner- How's the KSS coming
along? No pics in a while, so I figure you're busy. Hydraulic oil can be
aggressive to plastics. Are the thrusters build for that?? We use mainly DC motors;
the brushes require special oil too. If vegetable oil is thin
enough , why not?? No big problems in case of spilling;-) Van: owner-personal_submersibles@psubs.org [mailto:owner-personal_submersibles@psubs.org] Namens vbra676539@aol.com Hyco compensated everything with hydraulic oil. That's very interesting Alan. Let me know
how it works out. On the oil type, I've heard of guys using
vegetable oil, because if it leaks it won't pollute, and it's thin enough.
Olive oil sounds good. I like the idea of testing it with water in a jar. Good
idea. Maybe it would be a good idea to try several types of oil. There's some
type of "di-electric" oil some one remarked on before, and then
the WD40 stuff. How about regular 3-in-1 oil? Or maybe any light oil like 5
weight motor oil. A little bit leaked out isn't going to pollute anything. Some oils will break down plastics like
wire insulation or the epoxy "potting" on armature windings. I don't
think vegetable oil would do that. How about some light Hydraulic oil? Anybody else got info on this? Frank D. Stay cool with this summer's hottest
movies. Moviefone brings
you trailers, celebrities, movie showtimes and tickets!
Checked by AVG - www.avg.com Stay cool
with this summer's hottest movies. Moviefone brings you trailers, celebrities,
movie showtimes and tickets! Checked
by AVG - www.avg.com |