[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [PSUBS-MAILIST] Subdate

Vance,

 

The gauge of the Alu is 3 mm. Could be a little thinner but this is strong, easy to manufacture and just need few frames to keep the shape.

 

Emile

 

Van: owner-personal_submersibles@psubs.org [mailto:owner-personal_submersibles@psubs.org] Namens vbra676539@aol.com
Verzonden: maandag 8 juni 2009 0:48
Aan: personal_submersibles@psubs.org
Onderwerp: Re: [PSUBS-MAILIST] Subdate

 

Emile,
What gauge is the aluminum for your fairwater tanks?
Vance




-----Original Message-----
From: Emile van Essen <emile@airesearch.nl>
To: personal_submersibles@psubs.org
Sent: Sun, 7 Jun 2009 2:47 pm
Subject: [PSUBS-MAILIST] Subdate

Hi all,

 

Good progress on our Kreideseesub/ Eurosub project.

 

 

This weekend we cut, fit check and step weld the main ballast tanks.

Carsten decided to make the MBT from Alu instead of GRP for production and safety reason.

 

Also the steering servo an spool for the emg. Buoy are in

 

This month all metal work will be finished so the hull can be sandblasted and painted.

 

Regards,

 

Emile van Essen

Hobbemalaan 54

1816GE Alkmaar

0031-72-5122401 / 0031-6-46375374

 

 

A Good Credit Score is 700 or Above. See yours in just 2 easy steps!

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.12.55/2160 - Release Date: 06/07/09 05:53:00