[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PSUBS-MAILIST] Vacum test
870- 1090 mbar is the min - max atmosphere pressure count on sealevel.
The former Spurdog owner told me that he surface that boat that way that he
start the dieselmotor underwater and press the diesel exhaust fumes to the dive tanks.
And if he can not here any voice or sound anymore in the interior the boat surface normaly..
But he old me that he was very carefully with the presure compensating ballvale on the hatch
of this 60ts monster after surfacing and before he can open the hatch -
otherwhise it will may damage his ears..
Its maybe also a good choise to kill a fire inside the sub..
just start the diesel or the air compressor and evacuate the interior.. smile..
vbr Carsten
"Cliff Redus" <cliffordredus@sbcglobal.net> schrieb:
> Brent when I did my shop testing with a vacuum pump, I would pull the boat down from 1 atm (14.7 psia or 1015 mbar) down to 12.7 psia ( 875 mbar) while I was in the boat. It was not uncomfortable. Was easy then to squirt some soapy water onto all my through hulls to check for leaks. You wouldn't want to pull a hard vacuum. As a comparison, Mount Everest has an elevation of about 29,000 ft the barametirc pressure is about 300 mbar.
>
> Cliff
>
>
>
>
> Cliff Redus
> Redus Engineering
> USA Office: 830-663-6445
> USA mobile: 830-931-1280
> cliffordredus@sbcglobal.com
>
>
>
>
> ________________________________
> From: Brent Hartwig <brenthartwig@hotmail.com>
> To: PSUBSorg <personal_submersibles@psubs.org>
> Sent: Monday, June 1, 2009 2:07:58 PM
> Subject: RE: [PSUBS-MAILIST] Vacum test
>
>
>
> Thanks Much Carsten,
>
> I see says the blind man as he spits into the wind, it's all coming back to me now.
>
> I thought you meant you were using a aqua lung instead of your own lungs. ;}
>
> I had to check to see if 50 millibars was almost a complete vacuum, or only a slight vacuum, since I'm used to using inches of mercury.
>
> I was talking with a composite fabricator last week, and he was telling me how some folks will use a shop vac to pull the bulk of the air out of a vacuum bagging project, then close the valve for the bag, then turn off the shop vac. Then turn on the vacuum pump, since many of the smaller vacuum pumps are slow to pull the bulk of the air out of a larger space. I can see how this would be useful when vacuum testing a sub unmanned down as far as your vacuum pump would go, after any major changes to items connected to a subs thru hulls.
>
> The other thing that comes to mind is, that all other items in the subs interior need to be able to withstand the amount of vacuum you plan to pull.
>
> Regards,
> Szybowski
>
>
>
>
> > Subject: RE: [PSUBS-MAILIST] Vacum test
> > From: MerlinSub@t-online.de
> > To: personal_submersibles@psubs.org
> > Date: Sun, 31 May 2009 22:54:00 +0000
> >
> > You need just some millibars underpressure and a barometer.
> >
> > No need for a big vaccum.
> >
> > If the underpressure stays for a minute or so - the boat is tight.
> >
> > If you take to much underpressure you may seal the leaks in the o-rings/hatches configuration etc.
> >
> > Subs are untight normaly only on or near the surface.. Deeper the waterpressure tight everything if proper construction..
> >
> > The lung is a wounderful very fine vaccum pump.. Cost nothing and waste no space.
> > Just breath out to a snorckel pipe conect to a ballvale - close it before you end - and do it 3-4 times this way.
> >
> > vbr Carsten
> >
> >
> >
> > "Brent Hartwig" <brenthartwig@hotmail.com> schrieb:
> > >
> > >
> > >
> > > Cliff and Carsten,
> > >
> > > Did you use a vacuum pump or shop vac to pull the partial vacuum? Isn't it hard to draw air into your lungs from SCUBA when the vacuum is trying to suck it out of your mouth? I had planned to do a unmanned test using a vacuum pump to do some basic low pressure leak testing on my sub before taking it for actual water testing. Just let the pump go down as far as it can, then turn off the valve and see if the partial vacuum holds. For infusion molding applications they some times use ultrasonic leak detectors and stethoscopes for detecting leaks on the out side of the mold plug layup. Like seen here at Fibre Glast.
> > >
> > > http://www.fibreglast.com/showproducts-category-Vacuum%20Infusion-20.html
> > >
> > >
> > > We used a chalk duster when testing the seal of large concrete CA apple cold storage rooms.
> > >
> > > I've seen a couple of subs that didn't do a vacuum test at the shop before they went and put the subs in the water for there first water test, such as the Alicia sub, and if they had, they would of saved a fair bit of time. Not to mention all the people that came to see the sub do it's first test dive laughing at you for being wet behind the ears. ;}
> > >
> > > I've been using a vacuum on my sub a lot lately. Shop vacing all the rust, paint and copper slag out after blasting that is.
> > >
> > >
> > > Regards,
> > > Szybowski
> > >
> > >
> > >
> > >
> > > > Subject: Re: [PSUBS-MAILIST] Vacum test
> > > > From: MerlinSub@t-online.de
> > > > To: personal_submersibles@psubs.org
> > > > Date: Mon, 25 May 2009 21:01:00 +0000
> > > >
> > > > I use my lungs, a ballvalve and a snorckel to evacuate the internal of
> > > > Sgt.Peppers some 50 milibars to check for leak as predive procedure.
> > > >
> > > > vbr Carsten
> > >
> > >
> > >
> > >
> > >
> > > I pulled a partial vacuum on my boat to look for leaks. I actually had
> > > someone working the vacuum pump and I climbed in the boat with a bottle
> > > of soapy water which I squirted at each fitting. While this works to
> > > look for leaks, it is not a good test of the structural integrity of
> > > the boat as the max depth you can simulated is 34 ft (10m) of fresh
> > > water.
> > >
> > > Cliff
> > >
> > > >
> > > >
> > > > "glen brown" <glenbrown@vodamail.co.za> schrieb:
> > > > > Hi
> > > > > Can anyone be so kind to tell me if any one has used vacum to test there sub
> > > > > for leaks and the integrity of there hull when i used to dive for diamonds
> > > > > on the west coast of south africa we used to prime our gravel pipes and
> > > > > pumps with vacum either using a venturi ,milkmachine, car airconditioner
> > > > > motor ect I remember one day we had nothing to use so i decided to use a
> > > > > 300hp tractor engine making an adapter to the air intakeof the engine and
> > > > > using a 44gal drum as a safety resivoir to protect the engine from water i
> > > > > clearly remember how the drum was crushed by the pressure differance any
> > > > > coments.
> > > > > All the best
> > > > > Glen S.A
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > ************************************************************************
> > > > > ************************************************************************
> > > > > ************************************************************************
> > > > > The personal submersibles mailing list complies with the US Federal
> > > > > CAN-SPAM Act of 2003. Your email address appears in our database
> > > > > because either you, or someone you know, requested you receive messages
> > > > > from our organization.
> > > > >
> > > > > If you want to be removed from this mailing list simply click on the
> > > > > link below or send a blank email message to:
> > > > > removeme-personal_submersibles@psubs.org
> > > > >
> > > > > Removal of your email address from this mailing list occurs by an
> > > > > automated process and should be complete within five minutes of
> > > > > our server receiving your request.
> > > > >
> > > > > PSUBS.ORG
> > > > > PO Box 53
> > > > > Weare, NH 03281
> > > > > 603-529-1100
> > > > > ************************************************************************
> > > > > ************************************************************************
> > > > > ************************************************************************
> > > > >
> > > > >
> > > >
> > > >
> > > >
> > > >
> > > > ************************************************************************
> > > > ************************************************************************
> > > > ************************************************************************
> > > > The personal submersibles mailing list complies with the US Federal
> > > > CAN-SPAM Act of 2003. Your email address appears in our database
> > > > because either you, or someone you know, requested you receive messages
> > > > from our organization.
> > > >
> > > > If you want to be removed from this mailing list simply click on the
> > > > link below or send a blank email message to:
> > > > removeme-personal_submersibles@psubs.org
> > > >
> > > > Removal of your email address from this mailing list occurs by an
> > > > automated process and should be complete within five minutes of
> > > > our server receiving your request.
> > > >
> > > > PSUBS.ORG
> > > > PO Box 53
> > > > Weare, NH 03281
> > > > 603-529-1100
> > > > ************************************************************************
> > > > ************************************************************************
> > > > ************************************************************************
> > > >
> > >
> >
> >
> >
> >
> > ************************************************************************
> > ************************************************************************
> > ************************************************************************
> > The personal submersibles mailing list complies with the US Federal
> > CAN-SPAM Act of 2003. Your email address appears in our database
> > because either you, or someone you know, requested you receive messages
> > from our organization.
> >
> > If you want to be removed from this mailing list simply click on the
> > link below or send a blank email message to:
> > removeme-personal_submersibles@psubs.org
> >
> > Removal of your email address from this mailing list occurs by an
> > automated process and should be complete within five minutes of
> > our server receiving your request.
> >
> > PSUBS.ORG
> > PO Box 53
> > Weare, NH 03281
> > 603-529-1100
> > ************************************************************************
> > ************************************************************************
> > ************************************************************************
> >
>
************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003. Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.
If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
removeme-personal_submersibles@psubs.org
Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.
PSUBS.ORG
PO Box 53
Weare, NH 03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************