|
Hi Brent, my tower is going in the hull, I have not 1
drawing,,im not finshed with the front view port , its just sitting in for a pic
but will take pictures when i get to that part.All the windows have 8''
viewing. The body has K-350 style windows,,the motor assembly i got from
Gary Sluis and is delrin and has u-cup seal and needs delrin washers, going to
make a test pod for hatch dogs to test the u-cup seal. will take a pic tomarrow
on tower hatch ring inside framing. Les
----- Original Message -----
Sent: Wednesday, April 22, 2009 6:56
PM
Subject: RE: [PSUBS-MAILIST] new
pictures
Greetings
Subdudes, Did you miss me / don't answer
that. ;}
I see your
keeping busy Les. I like the lower side viewports. I was
thinking of adding two in my tube section on my K-250. I'm currently
surrounded by a number of large metal lathes so it shouldn't be to hard.
Is your conning tower tube going into the main pressure hull tube some what
like on the K boats?
Do you
have a drawing of how you plan to attach your bow
viewport?
Did you
make your own K-350 style viewport seating
rings?
Is that
delrin I see used in the motor thru hull assembly?
Could you
tell us a little about that assembly?
" If I'm free, it's because I'm always running. " -Jimi
Hendrix
Regards,
Szybowski
From: lesmarki@triton.net
To: personal_submersibles@psubs.org
Subject:
[PSUBS-MAILIST] new pictures
Date: Wed, 22 Apr 2009 01:38:30 -0400
Hi all, I put a few new pictures up on
psubs, Les Katschor
|