[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [PSUBS-MAILIST] port question

Thats a massive sub Jim !   You'll have a nice view of all those wrecks ! 
 
I'm going to wait a bit to try the epoxy, it's been a little chilly here.
 
Brian
-----Original Message-----
From: owner-personal_submersibles@psubs.org [mailto:owner-personal_submersibles@psubs.org]On Behalf Of Jim Kocourek
Sent: Wednesday, February 11, 2009 7:44 AM
To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] port question

Hi Vance,
 
The front viewport is 38 inches in diameter. The mating surface is two 90 degree surfaces. That would a flat base with an OD surface at 90 degrees.
 
I can hardly wait to install it, but it will be one of the very last things as it is a great way to get things in and out!
 
Best Regards,
 
Jim
 
----- Original Message -----
Sent: Wednesday, February 11, 2009 7:42 AM
Subject: [PSUBS-MAILIST] port question

Jim,
What's the radius on that front viewport? Cone angle for the mating surface?
Vance