|
Jim, Remember the pictures as you go, to make
the rest of us jealous. Norm P. From: owner- Hi All, I'm finally making some real progress! Today I dropped
off my transition cone at the heat treaters for stress relieving. When
that is completed it goes to the machine shop to machine the 38 inch
diameter window seat. The maching is estimated at $785.00 which seemed to me
quite reasonable since few are able to handle 48 inch diameter pieces. I have aso finished the four main ballast tanks and pressure
tested them up to 100 PSI. I will eventually use 750 psi test but do not have
capability in my shop to do this yet. Best regards, Jim K |