[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [PSUBS-MAILIST] Link to Video of "cue ball" arm



Hello Frank,

I was in my local hardware store yesterday, and took a look at there large ball valves. The whole is large as you mentioned, but the nylon type seals look to be a perfect seal for are desired application. They only require a basic step groove to be machined into a new custom machined part. If one chose to go that route. The type of valve I was looking at was easy to unbolt and remove the seals. The nylon type seals should be much easier to pivot the ball on then many types of O-rings.

Regards,
Brent Hartwig



From: ShellyDalg@aol.com
Date: Thu, 28 Aug 2008 12:05:22 -0400
Subject: Re: [PSUBS-MAILIST] Link to Video of "cue ball" arm
To: personal_submersibles@psubs.org

Hi Brent. Ya, I think a regular ball valve could be re-worked to achieve what we're after. That project is on hold for now, and we'll see what Vance comes up with in the mean time. Frank D.




It's only a deal if it's where you want to go. Find your travel deal here.