Dean, I've been working up a design for a wave piecing FRP front fairing for my K-250 that can be attached for better towing. I'll send some drawings and model renderings when I get more done. Brent From: joeperkel@hotmail.com To: personal_submersibles@psubs.org Subject: RE: [PSUBS-MAILIST] towing Date: Tue, 12 Aug 2008 16:05:54 +0000 Dean, The CC Roamer is a good choice due to the differential capability you have with twin screws and rudders, particularly in close quarters. Rafting, with spring lines fore and aft to the fendered sub alongside, will be required for close quarter maneuvering, ie marinas. Practice, practice, practice, out away from everybody. How much scope you let out on the tow line for long distances, will be determined by how your tow (sub) rides in the water, and local conditions. There is a formula for determining line size, based on displacement, find it. The sub will have lots of inertia to overcome. Make sure hardware is not fastened to fairings, only to frame or hull proper. Use the same hook and eye hardware used by towboat recovery guys, visit a towboat US or like near you. Joe From: Recon1st@aol.com Date: Tue, 12 Aug 2008 10:52:56 -0400 Subject: Re: [PSUBS-MAILIST] towing To: personal_submersibles@psubs.org Well guys I am back at it part time
too many projects to get done
My Question is on towing
Does anyone out there have experience in towing?.
I now have an operational surface support craft
35' Chris Craft roamer steel hull and lots of power
My sub design will require towing and sure would appreciate any experience
in this area.
At first thought looked pretty straight forward but I've changed that view heheh
Dean Looking for a car that's sporty, fun and fits in your budget? Read reviews on AOL Autos. |