From: vbra676539@aol.com
Reply-To: personal_submersibles@psubs.org
To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] MIG Welding a Sub
Date: Tue, 24 Jul 2007 18:28:39 -0400
Alec and all,
My experience is that the root pass must be completed, and that flux core
and all the other hobby shop types aren't up to the task. Perry ran stick,
period, and back chipped as needed from both sides to complete the root. At
the nuclear level, dependant on steel thickness, TIG is fine for the same
purpose, and generally requires less tending afterwards due to the smaller
puddle and low oxygen therein. Mind you, a whole BUNCH of K-subs are out
there MIG welded to a fair-the-well, including mine, and they have all
passed their tests as far as I know.?Stick welding seems to be the best
compromise, however. I'll be interested in Dan's take on that.
Vance
-----Original Message-----
From: Smyth, Alec <Alec.Smyth@compuware.com>
To: personal_submersibles@psubs.org
Sent: Tue, 24 Jul 2007 4:47 pm
Subject: RE: [PSUBS-MAILIST] MIG Welding a Sub
I do hope Dan Lance has seen this thread and can put in a comment. In the
interim, what I can say is that I had a conversation with him recently on
just this topic. Dan is a professional welder with decades of experience, a
welding?instructor, and?someone who has successfully completed?his own
submarine.?I know?he believes very strongly that MIG is innapropriate for
full penetration applications. It is an excellent method for things like
stiffeners, because it's?fast, easy, and even produces nice?finish. But for
pressure boundary welds, you absolutely MUST have full penetration and no
question?about porosity.
?
Hopefully he'll see this and give a more detailed response.
?
?
?
?
thanks,
Alec
The contents of this e-mail are intended for the named addressee only. It
contains information that may be confidential. Unless you are the named
addressee or an authorized designee, you may not copy or use it, or
disclose it to anyone else. If you received it in error please notify us
immediately and then destroy it.
From: owner-personal_submersibles@psubs.org
[mailto:owner-personal_submersibles@psubs.org] On Behalf Of Lil Brother LLC
Sent: Tuesday, July 24, 2007 3:56 PM
To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] MIG Welding a Sub
Brent,
?
Ok, I think that answers my question.
?
I'll probably go with a MIG with gas and flux core wire. It sounds like the
best method, even though it can be porous.
?
I already have a multi-setting auto darkening helmet. I don't weld without
it, make life soooo much easier.
?
James Long
Owner/Designer
Lil Brother LLC (Instrument Division)
----- Original Message -----
From: Brent Hartwig
To: personal_submersibles@psubs.org
Sent: Tuesday, July 24, 2007 3:21 AM
Subject: [PSUBS-MAILIST] MIG Welding a Sub
James,
I'm not a welding expert, I suggest you talk with Frank D. about welding
and/or check out some of the forums great posting on welding. What I would
say from what I've gathered from my relitive that fabricates back-hoe
buckets for a living is, that if you use a flux cored MIG wire allong with
a shielding gas(s) and clean the?welding area really well, you should be
able to weld most, if not all your sub this way.
Some like to use TIG welds for there root welds on through hulls,?because
it tends to get well sealed welds, with very little if any porosity. That
is why allot of gas tanks are welded with TIG.
I have a local friend that fabricates and welds stainless steel tanks of a
high quality.? I'm planning on having him fabricate out of 316 stainless
steel my VBT's, gas tanks, fresh water tanks, diesel tanks, etc. for my
subs.
http://www.solartanks.com/category_2.htm
The thru hull welds on his tanks used to be done with TIG, since they
looked so nice and sealed great.? But that took to long compared to MIG,
and they can get the MIG welds totally sealed.? So now they mostly just use
MIG. The heads he uses are pressed and then welded on with a special
automated MIG machine. Last week I finished some CAD drawings for him to
get the shapes of the hole cutouts for tubes that are welding off to one
side of?the tanks. I have the sheet metal program in Solidworks that allows
me to build a sheet metal type part in 3D and then lay it flat to take
drawings off of it. I also had to design a couple of stainless steel
template jigs to mark the small pipes as well as the tanks them selves,
where they need to be cut. The jigs would likely be?CNC laser, or aqua jet
cut out of 1/8" stainless steel plate and then rolled.
If your going to use TIG, just remember that it puts allot more heat to the
parts being welded, and it takes a lot longer then MIG. So if you are
worried about warping your parts with the heat from the TIG, you might want
to use just MIG and/or carefully stitch weld the parts with MIG or TIG or
just duck tape it together.? Duck tape won't add any heat to your parts so
you won't get any warping. Also if your going to switch between MIG, TIG,
Stick, and a cutting torch, your going to want a great auto darkening
helmet that has three of more darkness settings like the higher end GE
Speedglass helmets. They tend to run about $325.
For very thick parts, (of which most of use are not needing on are subs)
I've been told high amperage stick machine?is the way to go.
If I have any holes in my logic above I hope the group enlightens us.
Best Regards,
Brent Hartwig
From: "Lil Brother LLC" <lil_brother_llc@bellsouth.net>
Reply-To: personal_submersibles@psubs.org
To: <personal_submersibles@psubs.org>
Subject: Re: [PSUBS-MAILIST] Stepped sail design .....opinions?
Date: Tue, 24 Jul 2007 00:01:59 -0500
Brent,
?
So, they have been made in multiple ways. I figure spinning would be the
cheapest. There is less labor involved with a spun piece of metal, although
you still need the mold (form).
?
I've been thinking about what processes would be needed to build and
complete a sub. I can get just about anything made.(Since I don't have any
machinery). I would outsource it all.
?
I can weld......which brings up another question. Is there any
specifications on wire or stick welding? I would prefer wire......easier
logistically.....and I hate stick welding.....
?
James Long
Owner/Designer
Lil Brother LLC (Instrument Division)
----- Original Message -----
From: Brent Hartwig
To: personal_submersibles@psubs.org
Sent: Monday, July 23, 2007 11:50 PM
Subject: Re: [PSUBS-MAILIST] Stepped sail design .....opinions?
James,
From what I understand the spun heads are the best, since they have a even
thickness.? The pressed heads can be great to, but will need to be made out
of a little thicker metal to get the same strength as the spun heads, since
they are thinner in the middle from the metal being stretched. It' wouldn't
be practical for most aplications to machine the heads. Some heads are
casted, but are allot more brittle then the other types.
Since the spun and pressed heads are usually made from annealed steal so
there easier to form, you could have them annealed again to take out allot
of the stresses put into them from the forming process.? Then if you wish,
they can be tempered to make them even harder. But I would design the heads
to be used in an annealed state, so they can take a collision with a boat,
rocks, etc. which would just likely dent them instead of cracking them,
like if they were tempered to much.
From: "Lil Brother LLC" <lil_brother_llc@bellsouth.net>
Reply-To: personal_submersibles@psubs.org
To: <personal_submersibles@psubs.org>
Subject: Re: [PSUBS-MAILIST] Stepped sail design .....opinions?
Date: Mon, 23 Jul 2007 22:51:08 -0500
Brent,
?
I can just about draw anything in Inventor...... Now assembling those
pieces can get tricky...like aligning the bubble on top of that partially
rounded topped tube.....that sucked...I had to think about it some. The
Dome wouldn't be symmetrical, so it would have to go on one way (this is
because it is a slice of a dome....not a true hemi-sphere)
?
I've been working on my sub design.......I may take you up on the
files....but let me get it a little further done.? I started with structure
rings on the outside of the crew hull.....I'm going to move the rings to
the inside for better strength and easier ballast tank construction. It
will require a floor plate to be made for the crew cabin, but that just
means less weight to add later.
?
I do have a question........do you know, how are the end metal domes for
the crew compartment made? Are they spun? Pressed? Machined? I'm sort of
wondering, because metal that shape can be a major pain in the ass to find.
?
James Long
Owner/Designer
Lil Brother LLC (Instrument Division)
----- Original Message -----
From: Brent Hartwig
To: personal_submersibles@psubs.org
Sent: Monday, July 23, 2007 9:19 PM
Subject: Re: [PSUBS-MAILIST] Stepped sail design .....opinions?
Hi James,
I'm self taught as well, and have found a few tricks.? I've also found that
having short video tutorials from a couple of different sources helps
tremendously. I have archived loads of short video tutorials, that if you
wanted, I could burn them onto a DVD and send them to you. I just take it
one tool at a time.
I would share my Solidworks files with you as well as just about anyone
else. I've found Solidworks to be a very robust CAD program that I haven't
hardly scratched the surface with yet in regards to what it can do. That
doesn't mean it's that hard to use, just deep. If you get stuck just email
or better yet call me.
Brent
From: "Lil Brother LLC" <lil_brother_llc@bellsouth.net>
Reply-To: personal_submersibles@psubs.org
To: <personal_submersibles@psubs.org>
Subject: Re: [PSUBS-MAILIST] Stepped sail design .....opinions?
Date: Mon, 23 Jul 2007 17:00:27 -0500
Brent,
?
I already posted on the iges and step files......would have to see how they
turned out after conversion.
?
I stared with Inventor many years ago, and haven't spent anytime converting
to Solid Works. I really like Inventor...but it is a pain to do some
things. Plus I'm self taught.....so I really don't want to learn something
new. Solid Works is partially like Inventor....but some of the procedures
are so different, I could just about draw the part before I could figure
out how to start with SW.
?
I have a friend in Russia who (I think) has human models.....I'll check. I
know he uses Solid Works.
?
I could be persuaded to use Solid Works if people are going to share.
?
James Long
Owner/Designer
Lil Brother LLC (Instrument Division)
----- Original Message -----
From: Brent Hartwig
To: personal_submersibles@psubs.org
Sent: Monday, July 23, 2007 2:55 PM
Subject: Re: [PSUBS-MAILIST] Stepped sail design .....opinions?
James,
?Ugly as a dogs butt perhaps, but my dog Harley likes it. ; )'? That hull
was just for fun. You win some and loose the rest.? In regards to a human
model, I need to do the same thing. Carsten some time back, posted some
human profiles on the Moki picture exchange I was planning to use as a base
to model mine in Solidworks. Obviously Joe has a human model, but so far we
have not figured out how to exchange IGES or STEP files that work.
Perhaps?we should try again Joe.? Will your CAD program Inventor except
IGES or STEP files.? STL files should also work, but they don't give you as
smooth of models as IGES or STEP files. I think you said you have
Solidworks, so why would you want to use Inventor? I'll be interesting in
seeing your model of the swing able half ladder.
Regards,
Brent
From: "Lil Brother LLC" <lil_brother_llc@bellsouth.net>
Reply-To: personal_submersibles@psubs.org
To: <personal_submersibles@psubs.org>
Subject: Re: [PSUBS-MAILIST] Stepped sail design .....opinions?
Date: Mon, 23 Jul 2007 13:24:45 -0500
Brent,
?
Yep...that is the basic idea....but I hate the lines of your sub. It's
about as ugly as a dogs butt. (Sorry.....couldn't resist) I'm a more formal
lines type of person. Not to say new shapes and ideas are not viable or
possible, I just like the way the tubular shape of a sub looks.
?
I've been working on the design some, but haven't had a chance to put
anything on the web (mainly because I'm not finished yet).
?
I know what I could really use....a model of a person for inventor. I need
the representation (movable) to make sure the sub scales out to the right
size.
?
With the Stepped sail design.....it is important to know the average
shoulder width.......so the person in the top dome can actually move.
?
I did decide the pilot (captain, driver, etc.) will be located in the lower
dome......it would be far to hard to position instrument and controls in
the top dome.
?
Also I'm working on a boarding idea for the upper dome......like a
swingable half ladder. when pressure is put on it.....it locks in position,
then the ladder has spring indents for other positions when no pressure is
on it.
?
I'm actually trying to incorporate all the necessary piping and bulkheads (
and such) as I go. I do not have an extensive library......so some of the
items will be just blocks.
?
?
James Long
Owner/Designer
Lil Brother LLC (Instrument Division)
----- Original Message -----
From: Brent Hartwig
To: personal_submersibles@psubs.org
Sent: Monday, July 23, 2007 3:06 AM
Subject: RE: [PSUBS-MAILIST] Stepped sail design .....opinions?
Greetings James,
It can and has been done. I would add some thickness to the flange at the
angle joint. Here is the model I just finished of a stepped sail basicly
like the one you showed use. I was just going to build the sail 3D model,
but I got carried away.
http://www.frappr.com/?a=viewphoto&id=2628470&pid=7095469
Regards,
Brent Hartwig
??????????????? "Consistency is the refuge of the unimaginative. "
???????????????????????????????????????????????????????????? - - Oscar
Wilde
From:??"Lil Brother LLC" <lil_brother_llc@bellsouth.net>
Reply-To:??personal_submersibles@psubs.org
To:??<personal_submersibles@psubs.org>
Subject:??[PSUBS-MAILIST] Stepped sail design .....opinions?
Date:??Sun, 22 Jul 2007 17:15:44 -0500
>So Joe Perkel and I have been having a thorough discussion.....which I've
>enjoyed the exchange.
>
>I have some questions about the image that is attached. (Sorry....hated
to
>kill the bandwidth, but didn't know how to le the image be accessible.)
>
>Does the image have a chance to be successful?
>
>Will the angled mounting of the dome hatches cause any structural
weakness
>(other than the acrylic dome itself)?
>
>I know anyone who answers is doing so with the best intentions. I know
that
>only real life testing is the only way to know for sure.
>
>My design is only for a depth of 250 ft max.
>
>Also understand.....the drawing is a preliminary......just drawn up to
>discuss the possible flaws of the idea.
>
>James Long
>Owner/Designer
>Lil Brother LLC (Instrument Division)
><< SteppedSailDesign.jpg >>
************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003. Your email address appears in our database because
either you, or someone you know, requested you receive messages from our
organization. If you want to be removed from this mailing list simply click
on the link below or send a blank email message to:
removeme-personal_submersibles@psubs.org Removal of your email address from
this mailing list occurs by an automated process and should be complete
within five minutes of our server receiving your request. PSUBS.ORG PO Box
53 Weare, NH 03281 603-529-1100
************************************************************************
************************************************************************
***************************!
*********************************************
************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003. Your email address appears in our database because
either you, or someone you know, requested you receive messages from our
organization. If you want to be removed from this mailing list simply click
on the link below or send a blank email message to:
removeme-personal_submersibles@psubs.org Removal of your email address from
this mailing list occurs by an automated process and should be complete
within five minutes of our server receiving your request. PSUBS.ORG PO Box
53 Weare, NH 03281 603-529-1100
************************************************************************
************************************************************************
***************************!
*********************************************
************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003. Your email address appears in our database because
either you, or someone you know, requested you receive messages from our
organization. If you want to be removed from this mailing list simply click
on the link below or send a blank email message to:
removeme-personal_submersibles@psubs.org Removal of your email address from
this mailing list occurs by an automated process and should be complete
within five minutes of our server receiving your request. PSUBS.ORG PO Box
53 Weare, NH 03281 603-529-1100
************************************************************************
************************************************************************
***************************!
*********************************************
************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003. Your email address appears in our database because
either you, or someone you know, requested you receive messages from our
organization. If you want to be removed from this mailing list simply click
on the link below or send a blank email message to:
removeme-personal_submersibles@psubs.org Removal of your email address from
this mailing list occurs by an automated process and should be complete
within five minutes of our server receiving your request. PSUBS.ORG PO Box
53 Weare, NH 03281 603-529-1100
************************************************************************
************************************************************************
***************************!
*********************************************
************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003. Your email address appears in our database because
either you, or someone you know, requested you receive messages from our
organization. If you want to be removed from this mailing list simply click
on the link below or send a blank email message to:
removeme-personal_submersibles@psubs.org Removal of your email address from
this mailing list occurs by an automated process and should be complete
within five minutes of our server receiving your request. PSUBS.ORG PO Box
53 Weare, NH 03281 603-529-1100
************************************************************************
************************************************************************
***************************!
*********************************************
________________________________________________________________________
AOL now offers free email to everyone. Find out more about what's free
from AOL at AOL.com.