|
Dean, Bad link to your FRAPPR images. R/Jay Respectfully, Jay K. Jeffries Andros Is., Bahamas A skimmer afloat is but a submarine, so poorly built it will not
plunge. From:
owner-personal_submersibles@psubs.org
[mailto:owner-personal_submersibles@psubs.org] On Behalf Of Recon1st@aol.com Well
I stumbled thru the frapper and loaded some pics nothin
spectacular here. getting home from Main some
old fassinoned solid model work. Lets see motor here
seat here etc. The
rings bolted on the pressure hull will have the entire outer
shell, battery pods, drop weights, vbts etc. Everthing gets
put on these rings nothing else welded directly to the hull. I
am doing this to maintain the integrity of the pressure hull. Will
only have air and O2 lines thru hull, and 4 control wires from
a laptop. Everything but life support and air will be fly
by wire one Joy stick to control everthing. Power
will come from 2= 10' and 1= 6' battery pods. 24
deep cycles hook up in sets of 72 volts DC I
am looking at quite a large hard vbt system guess
displacement <6,000 lbs
length 20 ft beam
4' 6" Dean
See what's free at AOL.com. |