[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] viewports

You need "the book"  its in the psubs under books
 
B
----- Original Message -----
From: Barkmann
Sent: Monday, December 19, 2005 11:09
Subject: [PSUBS-MAILIST] viewports

Dear all,
 
Does anyone kindly have a formula to calculate the strength of cast acrylic sheet relative to pressure acting on surface area and thickness (which also takes into account deformation % prior to faliure)
 
Further, can anyone kindly point me in the right direction to find info on fabricating view ports.
 
Regards,
 
Jack
 
 
 
----- Original Message -----
Sent: Monday, December 19, 2005 5:29 PM
Subject: Re: [PSUBS-MAILIST] viewports

brian
 
    all the specs are in asme pvho-1 it costs two hundered dollars on the asme web site or try a good engineering library
 
rick
----- Original Message -----
From: Gary Sluis
Sent: Monday, December 19, 2005 7:38 AM
Subject: Re: [PSUBS-MAILIST] viewports

Brian, Cast acrylic is what I am using.
 
Gary
----- Original Message -----
From: Brian Cox
Sent: Monday, December 19, 2005 9:32 AM
Subject: Re: [PSUBS-MAILIST] viewports

"Cast" Acrylic is what to use - correct ?
 
Brian
----- Original Message -----
From: Dan H.
Sent: Monday, December 19, 2005 04:51
Subject: Re: [PSUBS-MAILIST] viewports

Joe,
 
Look up Acrylic in a search, find a manufacture you like and either E-mail or call them with an inquiry about where the nearest stocking distributor is in your location.  That works for most anything your looking for.  Get a few distributors names and you can bounce pricing between more then one if you like.
 
Isn't the internet a great thing? ;-)
Dan H.
----- Original Message -----
From: JOE
Sent: Monday, December 19, 2005 12:54 AM
Subject: [PSUBS-MAILIST] viewports

Looking for a plastic supplier for viewports, in the USA
 
Thanks
Happy holidays
 
Joe