[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [PSUBS-MAILIST] manipulator arms

To: "'personal_submersibles@psubs.org'" <personal_submersibles@psubs.org>
Subject: RE: [PSUBS-MAILIST] manipulator arms
From: Hugo Marrero <HMarrero@hboi.edu>
Date: Mon, 5 Dec 2005 08:39:33 -0500
Reply-to: personal_submersibles@psubs.org
Sender: owner-personal_submersibles@psubs.org

Title: Message

Joe, I would try the sphere muck up with tubing covered with wire mesh.

Hugo

-----Original Message-----
From: Joseph Perkel [mailto:joeperkel@hotmail.com]
Sent: Saturday, December 03, 2005 9:50 PM
To: personal_submersibles@psubs.org
Subject: RE: [PSUBS-MAILIST] manipulator arms

Rick,

"Want to start the hull mockup but have not yet figured out how the make a hemisphere form plywood yet."

There are good hints about this within the homebuilt astronomical observatory community.

Joe

Prev by Date: [PSUBS-MAILIST] Interesting material (second attempt)
Next by Date: RE: [PSUBS-MAILIST] manipulator arms
Previous by thread: Re: [PSUBS-MAILIST] making hemispheres
Next by thread: RE: [PSUBS-MAILIST] manipulator arms
Index(es):
- Date
- Thread