[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PSUBS-MAILIST] Decompressing a Lockout
The main requirement is that the air quality is safe for human life.
Unless that air is purified (oil removed etc.), it is not a viable option. You may consider using air bottles and bank them.
You are correct on the pressure required being relatively low.
Tim Caffarella
>
> From: "Cliff McDonald" <cmcdonald@applikonusa.com>
> Date: 2005/06/24 Fri PM 04:25:47 EDT
> To: "Personal_Submersibles" <personal_submersibles@psubs.org>
> Subject: [PSUBS-MAILIST] Decompressing a Lockout
>
> I?ve been thinking back on some of the discussions of diver lockout
> operation and the need for a ?high pressure? compressor to decompress a
> lockout when at depth. I may be headed down the wrong path in my thinking
> but I believe a relatively low pressure / low amperage / low volume
> compressor would suffice as far down as 200 fsw. It only needs to be able
> to pump against approximately 100 psi of outside water pressure and must
> have somewhat of a low flow so that the lockout can be decompressed slowly.
> I?ve been looking at the specifications on the 12V air compressors used by
> 4WD enthusiasts to air tires back up after a day of running them off road at
> 6 ? 10psi. These are huge tires. The pumps that they use can put out about
> 1.7cfm of air at 90psig, in fact, they put out enough air to run a lot of
> basic air tools. Many are rated to 150psig. Considering that their cost is
> a few hundred dollars for a high quality pump and at least one of them only
> consumes about 10A at full rating, it seems to me that decompressing a diver
> lockout would not be that big of an obstacle. Am I missing something here?
> Best Regards,
> Cliff McDonald
>
>
************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003. Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.
If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
removeme-personal_submersibles@psubs.org
Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.
PSUBS.ORG
PO Box 311
Weare, NH 03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************