[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PSUBS-MAILIST] O-rings

To: personal_submersibles@psubs.org
Subject: [PSUBS-MAILIST] O-rings
From: sfreihof@aol.com
Date: Mon, 06 Jun 2005 19:26:40 -0400
In-reply-to: <4371B9E007C62D40A46FA016C2043E5705F6D4FF@cp_mail.cp.com>
References: <4371B9E007C62D40A46FA016C2043E5705F6D4FF@cp_mail.cp.com>
Reply-to: personal_submersibles@psubs.org
Sender: owner-personal_submersibles@psubs.org

Can anyone explain to me the differences in )-ring materials? I've heard of buna-N O-rings and nitrile O-rings, and I'm sure there's more, but I don't have a clue what's best to use for what...

What is a good source of information on O-ring construction, material, use, installation, etc.?

Tanks! (haha)

Stan

Follow-Ups:
- Re: [PSUBS-MAILIST] O-rings
  - From: "Dan H." <jmachine@adelphia.net>
- [PSUBS-MAILIST] Hull Shape question
  - From: "Chuck Will" <chuck@bestan.com>

References:
- RE: [PSUBS-MAILIST] Portal Material
  - From: "Alec Smyth" <Alec.Smyth@compuware.com>

Prev by Date: [PSUBS-MAILIST] Moki pics not going thru
Next by Date: [PSUBS-MAILIST] ambient breathing air system
Previous by thread: RE: [PSUBS-MAILIST] Portal Material
Next by thread: Re: [PSUBS-MAILIST] O-rings
Index(es):
- Date
- Thread