[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] ETEK motor (speed controller for this?)



Paul,

I'm presuming, for a surface craft, correct?  It's a heck of a lot of horse
power for a sub!  Also, if your thinking about using it on a sub with a
direct drive to the prop 3600 RPM is quite fast.

Here's a link to a controller site.  http://www.curtisinst.com/index.cfm

I bought one from them to control 36 volts.  It's a really nice unit.  It
looks like they have some that will handle 72 volts but for that HP, at 72
volts the current must be up around 400 amps.  That's a big controller and
one big pile of batteries if your going to run any longer then a car starter
does.

Dan H.

----- Original Message ----- 
From: <Deeperdowndude@aol.com>
To: <personal_submersibles@psubs.org>
Sent: Tuesday, February 15, 2005 4:24 AM
Subject: Re: [PSUBS-MAILIST] ETEK motor (speed controller for this?)


> Adam,
>
> Thanks for the information.  I looked at the website and I like the PMG
132 that produces 34 horsepower at 72 volts.  And it costs under $1000 so I
might buy one for my boat.   But I suppose it needs some kind of rheostat
switch like an ordinary electric trolling motor has, and I didn't see any on
their website.  So my question to everyone is, Are there any speed
controllers for this powerful of an electric motor available out there that
anyone knows about?
>
> Thanks in advance,
>
> Paul Silva
>
>
>
> ************************************************************************
> ************************************************************************
> ************************************************************************
> The personal submersibles mailing list complies with the US Federal
> CAN-SPAM Act of 2003.  Your email address appears in our database
> because either you, or someone you know, requested you receive messages
> from our organization.
>
> If you want to be removed from this mailing list simply click on the
> link below or send a blank email message to:
> removeme-personal_submersibles@psubs.org
>
> Removal of your email address from this mailing list occurs by an
> automated process and should be complete within five minutes of
> our server receiving your request.
>
> PSUBS.ORG
> PO Box 311
> Weare, NH  03281
> 603-529-1100
> ************************************************************************
> ************************************************************************
> ************************************************************************
>
>





************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
	removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.

PSUBS.ORG
PO Box 311
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************