[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] Acrylic Pressure Vessels



Hugo,
Thanks for answering, good points for sure. I will search about the JSL sub. 
There just seems to be something about sitting in a bubble : )

Steve

Quoting Hugo Marrero <hmarrero@hboi.edu>:

> Hi Steve,
> 
> You assummed correctly! The JSL sub sphere is all acrylyc and is rated to
> 3000 ft. While it is a great material to build a p-sub, our sphere costs us
> a whoping $120K, pressure tested and delivered. For a psub to 150 ft you are
> looking at least $50K. The lead time can be up to a year from the time you
> order it. Acrylic is adversely affected by uv light causing hazing,
> discoloration and crazing. It is a very soft material and scratches very
> easily, and once scratch it is expensive to repair. Acrylic is also very
> intolerant of high temperatures, and certain solvents, both of which will
> severely weaken the material's strenght.
> 
> For ABS approved design, acrylic viewports and hulls are placed out of
> commission after 10 years for flat viewports and 20 years for hemispherical
> viewports and spheres. This is whether they are in service or not. This is
> due to the lack of existing data to substantiate a longer service life. They
> can also expire after a pre-determined number of pressure cycles before the
> 10 or 20 year time allowance.
> 
> 
> regards,
> 
> Hugo
> 
> 
> 
> 
> ************************************************************************
> ************************************************************************
> ************************************************************************
> The personal submersibles mailing list complies with the US Federal
> CAN-SPAM Act of 2003.  Your email address appears in our database
> because either you, or someone you know, requested you receive messages
> from our organization.
> 
> If you want to be removed from this mailing list simply click on the
> link below or send a blank email message to:
> 	removeme-personal_submersibles@psubs.org
> 
> Removal of your email address from this mailing list occurs by an
> automated process and should be complete within five minutes of receipt
> of your request.
> 
> mailto:removeme-personal_submersibles@psubs.org
> 
> PSUBS.ORG
> PO Box 311
> Weare, NH  03281
> 603-529-1100
> ************************************************************************
> ************************************************************************
> ************************************************************************
> 
> 





************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
	removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of receipt
of your request.

mailto:removeme-personal_submersibles@psubs.org

PSUBS.ORG
PO Box 311
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************