[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] It's time for this one again: Bullshit bingo for submarine design discussions



a) no-cost
b) propane
c) automotive
d) impossible
e) never deeper than
f) accepted practice
g) take that off-line
h) gasoline/petrol
i) completely safe
j) good enough
k) nuclear
l) cast iron
m) win-win
n) think outside the box
o) determined after launching
p) result-driven
q) PVC/plastic
r) knowledge base
s) probably doesn't matter
t) will never happen
u) mindset
v) government surplus
w) ballpark
x) plywood
y) riveted

Hi Michael, TAKE THAT OFFLINE 

I just get all my marine cabel for my AUTOMOTIVE but non PETROL or
NUCLEAR driven sub for NO COST .  It PROBABLY DOESN'T MATTER but also
the Steinke Hoods I purchase last year via Alec from the US GOVERMENT
SURPLUS are IMPOSSIBLE cheap. I think they are also GOOD ENOUGH for the
accident which WILL NEVER HAPPEN. I delete to use any PLYWOOD, PROPANE
heather, PLASTIC or RIVETED on the boat to create a mostly COMPLETLY
SAFE boat. I think it is a ACCEPTED PRACTICE on my boat that we will
NEVER DEEPER THAN or 50 % of the maximum break load calculations to my
best KNOWLEDGE BASE. As you know I think allways OUTSIDE THE BOX but all
time RESULT-DRIVEN so I will WIN-WIN the building race. 
It is possible that I have to use CAST IRON as additional weight. But
that will be DETERMINED AFTER LAUNCHING.

Sorry I am not really familar with the englisch language.. What means
BALLPARK and MINDSET ? 

regards Carsten




************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
	removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of receipt
of your request.

mailto:removeme-personal_submersibles@psubs.org

PSUBS.ORG
PO Box 311
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************