RE: [PSUBS-MAILIST] K-350 Powder coating

["Robby Royster" <robby@roystersmachine.com>]

Steve, No I own a machine shop these are pictures at the powder coater.
The cost was about $2000.00 for the inside, outside and the ballast tanks
and motor guards.
I thought that wasn't to bad you can't get a car
painted for that.

I was concerned about the heat they use to bake it on, about 400Deg but I
don't think that was to hot to hurt anything, Besides it probably needed a
little stress relieving anyway.

As far as curing time, the way I understand it.
They spray the powder on then bake it until it gets to temperature, then
let it cool off.

They had it about a week and they painted it four times.
Some kind of zinc primmer all over
white on the inside and two coats of yellow on the outside.

We had some machine guards here at the shop done and they take a lot of
abuse
from metal shaving and Coolants they seem to hold up pretty good.

Regards
        Robby

-----Original Message-----
From: owner-personal_submersibles@psubs.org
[mailto:owner-personal_submersibles@psubs.org]On Behalf Of Steven Mills
Sent: Saturday, July 24, 2004 2:37 PM
To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] K-350 Powder coating




On Fri, 23 Jul 2004 15:32:40 -0500 Robby Royster writes:
> I posted some Pics moki@prismnet.com
> What do you think?

Robby,

Is this your shop and your work? Or sourced-out?

> now the work really begins...

Costs for powder coating and curing/time factors?

looks great !   --Steve



________________________________________________________________
The best thing to hit the Internet in years - Juno SpeedBand!
Surf the Web up to FIVE TIMES FASTER!
Only $14.95/ month - visit www.juno.com to sign up today!



************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
	removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of receipt
of your request.

mailto:removeme-personal_submersibles@psubs.org

PSUBS.ORG
PO Box 311
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************





************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
	removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of receipt
of your request.

mailto:removeme-personal_submersibles@psubs.org

PSUBS.ORG
PO Box 311
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************