[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PSUBS-MAILIST] pressure hull

To: personal_submersibles@psubs.org
Subject: [PSUBS-MAILIST] pressure hull
From: Jake Colman <jake@superdailies.com>
Date: Sat, 14 Feb 2004 20:34:20 -0800
Reply-to: personal_submersibles@psubs.org
Sender: owner-personal_submersibles@psubs.org

Hi everyone,
I have recently been rethinking mu sub design and am ready to start building. I was wondering if anyone knew of a place in the general Los Angeles area where a piece of 4 foot by ten foot piece of steel pipe with a 1/4 thickness could be purchased along with 2 hemispherical end caps and some other steel tubing 2 foot in diamater could be purchased? any help would be really appreciated.
thanks very much
<x-tad-smaller>Jake Colman
Dancing Donkey Entertainment
310-560-3055</x-tad-smaller>

Follow-Ups:
- Re: [PSUBS-MAILIST] pressure hull
  - From: "Norman-Burns" <blackstar01@prodigy.net>
- Re: [PSUBS-MAILIST] pressure hull
  - From: "Brian Cox" <ojaibees@ojai.net>

Prev by Date: Re: [PSUBS-MAILIST] Re: Submarine Questions? (was "Hey, looky, rocket fuel as ballast!")
Next by Date: Re: [PSUBS-MAILIST] Hey, looky, rocket fuel as ballast!
Previous by thread: Re: [PSUBS-MAILIST] "Wild Tech" Speed on Science Channel
Next by thread: Re: [PSUBS-MAILIST] pressure hull
Index(es):
- Date
- Thread