Re: [PSUBS-MAILIST] Troller motors

["Adam Lawrence" <adteleka@in-tch.com>]

This pdf file contains some very useful tidbits on designing a rotary shaft
sealing system for high pressure applications. There are some good
guidelines specific for using "Kalsi" seals, but these guidelines also
represent good recommended practice in general. This might be a keeper. I
was most interested in the part about using dual seals with lubricant
supplied between them at ambient pressure, Fig 3.19.

Adam


http://www.kalsi.com/Kalsi%20Seals%20Handbook%20Doc%202137%20Rev%200.pdf