[Date Prev][Date Next]
[Chronological]
[Thread]
[Top]
RE: [PSUBS-MAILIST] FEA
Is there a cheap program or share ware program that I can get to do this.
The cad programs I currently use are Autodesk Inventor 5.0 and Autocad 2002
Thanks again
Tim R.
-----Original Message-----
From: jbarlow@bjservices.ca [mailto:jbarlow@bjservices.ca]
Sent: Thursday, March 20, 2003 8:12 AM
To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] FEA
Finite Element Analysis.
A virtual model of an object is "built" in a computer and the program
breaks it down into a finite number (but very large number) of pieces
(elements) which have the applied material properties and interact with
their neighbours. An operator then applies a load and (mostly pressure in
this case) the program will spit out the stress that each area of the model
in under.
The reality of the answer relies on the way the model is built up, the
correct placement and magnitude of the applied loads by the operator. You
can get orders of magnitude difference between answers by slightly changing
the applied loads and the method of model construction.
Jay.
Tim Reilly
<TimR@cclengineering.com> To:
"'personal_submersibles@psubs.org'" <personal_submersibles@psubs.org>
Sent by: cc:
owner-personal_submersible Subject:
[PSUBS-MAILIST] FEA
s@psubs.org
20/03/2003 08:53 AM
Please respond to
personal_submersibles
Please forgive my ignorance, but what is FEA as refered in this message?
Thanks
Tim R.
-----Original Message-----
From: Warren Greenway [mailto:opensourcesub@yahoo.com]
Sent: Wednesday, March 19, 2003 9:57 PM
To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] OSS Pressure Hull, DoubleEndcap
You rock. Thanks for the rendering, that is cool.
A detailed 2D drawing would be great. It is Cosmos
FEA that is really giving me the headaches. I have
to rebuild all of the hull as a series of swept
features to run the FEA. Not a huge deal, but I have
been insanely pressed for time. I am working on it,
though. I think this hull has the potential to give
you high speed, if you want it. Hey, Pierre, you
have any luck with FEA on this?