Re: [PSUBS-MAILIST] Re: Welcome to the Personal_Submersibles_Disc ussion

["Warrend Greenway" <dub@linuxmail.org>]

LOL. Carsten, you rock! That is great!

Warren.

> A second idear for a long range space ship is also simple..
> 
> Put a heavy weight special-atomblow-from-together-generator in the ships
> centerpoint on a hydrauilc slider (should be a ball design ship..) than
> blow the ship with that generator so that each atom of the ships moves
> away from the others atoms of the ship and do not stop until the ship
> has a "size" greater than the universe - maybe 1 atom each some
> lightyears.. Than move the center of mass of the ship with a hydraulik
> cylinder to one side of the ship and stop the generator - the ship goes
> back to his normal size - just at an other point of the universe.
> Navigation of this ship should be very easy. 
> But this process should be very quick because it is maybe hard to
> respiration your lungs if the oxygen atoms so far away inside your
> lungs.. 
> 
> Life can be very easy.. Carsten
> 
> Warrend Greenway schrieb:
> > 
> > Sure, Carsten, I'll take the bait. I know a good couple things
> > about rocketry, various forms of propulsion, and spaceflight...
> > Or were you being sarcastic??? :) Hey! When will you be dropping
> > by the USA in your Euronaut? I'll buy you a beer!
> > 
> > Warren.
> > 
> > > Hi welcome here.. have you a drawing ?
> > >
> > > It is not serious to offer an idear and
> > > than not to explain how its works.
> > >
> > > And guys - not laughted but I have a nice idear for a spaceship
> > > which can run very easy short under lightspeed and with a power
> > > consuption to boost the ship to this speed which is very low
> > > and easy to handle. Ask is you want to know how it works.. :-)
> > >
> > > regards Carsten
> > >
> > >
> > > BauWauHausDesign@aol.com schrieb:
> > > >
> > > > hello all,
> > > >
> > > > i am a designer and enthusiast. i grew up with my father re-building
> > > > airplanes in our patio and have dreamed of underwater exploration.
> > > >
> > > > my question is this. i have come up with a design which eliminates the
> > > > essential problem of water pressure and implosion. a simple fiberglass
> > > > hull of 3/4" fiberglass is all to safely dive to a thousand feet or
> > > > more. it also means weight is a fraction of current designs and speeds
> > > > of around 30 knots. my question is where do i go now? i am more
> > > > designer than engineer, good with form, but not tolerances. i also
> > > > know my work will lead to patents because my design takes a completely
> > > > different approach to conventional design theory, so this is also a
> > > > concern.
> > > >
> > > > so anyone got any ideas?
> > > >
> > > > thanks alot,
> > > >
> > > > jeffrey
> > >
> > 
> > --
> > ______________________________________________
> > http://www.linuxmail.org/
> > Now with e-mail forwarding for only US$5.95/yr
> > 
> > Powered by Outblaze
> 

-- 
______________________________________________
http://www.linuxmail.org/
Now with e-mail forwarding for only US$5.95/yr

Powered by Outblaze