[Date Prev][Date Next] [Chronological] [Thread] [Top]

Re: [PSUBS-MAILIST] OSS Pressure hull basic layout.

To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] OSS Pressure hull basic layout.
From: MerlinSub@t-online.de (Carsten Standfuss)
Date: Fri, 24 Jan 2003 17:17:02 +0100
References: <20030124033337.3817.qmail@linuxmail.org>

Warrend Greenway schrieb:
 
> Gosh this
> weight constraint makes things exciting! 

Thats is engineering :-)))))))))) Its simple to design anything 
if you have not that borders... To design a 10 t Twinseater 
seams not a big deal..

Ian,
if you have the bolted flanke just were the stern endcap weld to the
cylinder is - than it is probably okay with the aft tower short in front
of this frame. 

Carsten

References:
- Re: [PSUBS-MAILIST] OSS Pressure hull basic layout.
  - From: "Warrend Greenway" <dub@linuxmail.org>

Prev by Date: Re: [PSUBS-MAILIST] OSS Pressure hull basic layout.
Next by Date: Re: [PSUBS-MAILIST] OSS Pressure hull basic layout.
Index(es):
- Chronological
- Thread