[Date Prev][Date Next]
[Chronological]
[Thread]
[Top]
Re: [PSUBS-MAILIST] OSS Pressure hull basic layout.
If you figure out how to economically interface one of those controllers
to a microcontroller, then you have my full attention. The real problem
with them is that they all use proprietary connectors...Except the USB
flavors, and the USB interface ICs usually take a lot of baby-sitting...
But I'm sure listening...An older style joystick would be easier in that
you can use a basic ADC to get the position.
Warren.
Warren.
> I also think it looks Neat.
>
> Question is hull steel worked still going for around
> $.57/lb or $1.25/kg and was that for A517?
>
>
> What about using a computer/ps2/x-box type controller?
>
>
> On Fri, 24 Jan 2003 09:02:21 +0800
> "Warrend Greenway" <dub@linuxmail.org> wrote:
> >OK. You have some really interesting ideas here. I
> >personally
> >would like to see two hatches, possibly of raised domes,
> >or
> >the cylinders. I thought your seating idea was great! I
> >also
> >like the "foot dome", that is an interesting concept,
> >because
> >it minimizes the volume. Also, putting the instruments
> >and
> >controls on rails so that they roll out of the way sounds
> >like
> >a good idea, then they wouldn't be in the way when you
> >are
> >climbing in. Did you get a chance to look at the
> >pictures of my canted idea?
> >
> >Warren.
> >
> >>
> >> hi,
> >>
> >> I did a little fiddling around with the pressure hull
> >>layout.
> >> Using a foot well, it seem that we could design a hull
> >>with
> >> around a 2 cubic meter displacement (~2000kg or
> >>~4400lbs).
> >>
> >> I'm interested in what people, in particular about the
> >> dimentions with regard to confort.
> >>
> >> Ian.
> >>
> >>
> >>
> >> http://www.prismnet.com/~moki/subfiles.html
> >> http://www.prismnet.com/~moki/20030123.175639/hull-v1.jpg
> >>
> >> Approximate displacement: 2 cubic meters (~2000kg or
> >>4400lbs)
> >>
> >> Hatch top is 2.5 feet from the water line, per ABS spec.
> >>
> >> One dome viewport, one cylinder style veiwport.
> >>
> >> Only rear seating position has a hatch, the dome doesn't
> >>not open.
> >>
> >> Seats would probably be made of cloth and hung "hammock
> >>style"
> >> so they be easily moved out of the way making it easy to
> >>access
> >> the front seating position.
> >>
> >> Front seating position is for the viewer/guest, the rear
> >>position
> >> is for the pilot, the idea is the pilot sitting slightly
> >>higher
> >> to see more.
> >>
> >> Controls would been to fold away so they do not inhibit
> >>passage
> >> to the front position.
> >>
> >
> >--
> >______________________________________________
> >http://www.linuxmail.org/
> >Now with POP3/IMAP access for only US$19.95/yr
> >
> >Powered by Outblaze
--
______________________________________________
http://www.linuxmail.org/
Now with e-mail forwarding for only US$5.95/yr
Powered by Outblaze