[Date Prev][Date Next]
[Chronological]
[Thread]
[Top]
Re: [PSUBS-MAILIST] Acrylic Moulds
That sounds like a neat way to get a heater. Cool!!! or rather hot!!
Jay.
Michael B Holt
<tlohm@juno.com> To: personal_submersibles@psubs.org
Sent by: cc:
owner-personal_submersible Subject: Re: [PSUBS-MAILIST] Acrylic Molds
s@psubs.org
09/01/2003 06:00 AM
Please respond to
personal_submersibles
On Wed, 8 Jan 2003 19:28:30 -0500 "Dan H." writes:
>
> I ran a horizontal steel rod a few inches
>under the sheet and hooked the ends of the rod to a welder on really
>low amperage. The rod got hot and heated the Plexiglas directly above
it
>in a straight line. It got pliable above the hot rod.
What is the effect on the strength of the material of heating and
cooling in a different shape?
Mike H.
________________________________________________________________
Sign Up for Juno Platinum Internet Access Today
Only $9.95 per month!
Visit www.juno.com