[Date Prev][Date Next] [Chronological] [Thread] [Top]

Re: [PSUBS-MAILIST] Framework around the hull.

I've used white play sand mixed into the paint to make a great nonskid surface.  It doesn't take much sand in the paint to make it nonskid either.  Two hands full in a gallon is plenty. 
It works great....... unless you try putting it through a paint gun! 
 
Dan H.
----- Original Message -----
From: SFreihof@aol.com
To: personal_submersibles@psubs.org
Sent: Wednesday, January 01, 2003 9:16 PM
Subject: Re: [PSUBS-MAILIST] Framework around the hull.

In a message dated 1/1/03 2:48:10 PM Eastern Standard Time, tlohm@juno.com writes:

Non-skid is a huge boat problem.   The best answer I ever heard
was from a Ross Norgrove book.  


Crushed (pulverized) walnut shells mixed with the paint works for non-skid surface.  You used to be able to buy it at marine supply stores.

Stan Freihofer
2 man Ambient Dry
Ft. Lauderdale