Re: [PSUBS-MAILIST] Re:UQC communications

["Mark Steed" <plutomark@mail.astate.edu>]

Daniel and Ray-I am very interested in this as well. Let me know what I can do to assist you or help out on this. Thanks-Mark Steed


---------- Original Message ----------------------------------
From: "Daniel Lance" <lanceind@cconnect.net>
Reply-To: personal_submersibles@psubs.org
Date:  Thu, 18 Jul 2002 19:59:55 -0700

>Hi Ray, 
>Thanks for the response. What is the best way to contact Captain Kittredge,
>USPS or email ? Could you give me his contact information.
>Thanks,
>Dan Lance
>
>----------
>>From: Ray Keefer <Ray.Keefer@Sun.COM>
>>To: personal_submersibles@psubs.org
>>Subject: Re: [PSUBS-MAILIST] Re:UQC communications
>>Date: Thu, Jul 18, 2002, 2:23 PM
>>
>
>> Hi Dan,
>>
>> I got a copy from Captain Kitteridge with the intention of making a couple
>> for the Regatta. Then afterwards for sale. All he provided was the
>> schematic. No parts list or sources. The components refered to on the
>> schematic are a little dated and I had a hard time finding any specs on
>> them.
>>
>> There was no details of the key component, the transducer. Apperantly the
>> Captain built his own out of a ceramic cylinder, machined parts and
>> epoxy.
>>
>> The printed circuit board is a single-sided board that the Captain had
>> made for him from a shop on the East Coast.
>>
>> The best way to get a copy is to contact the Captain directly.
>>
>> Regards,
>> Ray
>>
>>> Date: Thu, 18 Jul 2002 16:29:32 -0700
>>> Subject: [PSUBS-MAILIST] Re:UQC communications
>>> From: "Daniel Lance" <lanceind@cconnect.net>
>>> To: personal_submersibles@psubs.org
>>> X-Priority: 3
>>>
>>> To Psub community,
>>> I am interested in building some UQC communication equipment for my K-350. I
>>> saw a thread in the archives about a schematic designed by Captain
>>> Kitteridge might be available . Does anyone know where I can purchase a copy
>>> ?   I would be interested in any feedback someone could offer on this
>>> subject, or any other designs that have been proven to work.
>>> Thanks ,
>>> Dan Lance
>>
>> 
>