RE: Re: [PSUBS-MAILIST] Minn Kota Motors

["Graham K" <cryogenicz@dsl-only.net>]

Will do, thanks for the Advice :)

-----Original Message-----
From: owner-personal_submersibles@psubs.org
[mailto:owner-personal_submersibles@psubs.org]On Behalf Of
rjune@fuse.net
Sent: Thursday, June 27, 2002 5:27 AM
To: personal_submersibles@psubs.org
Subject: Re: Re: [PSUBS-MAILIST] Minn Kota Motors


Just mke sure you rinse them in fresh water after every use ... 
this will help extend the life of the motor ... 
by the way I recomend this for all items used in salt water ...
even stainless steel will pit from the salt given enough time

Roger
> 
> From: Brent Shaw <drydivenz@yahoo.com>
> Date: 2002/06/26 Wed PM 06:43:32 EDT
> To: personal_submersibles@psubs.org
> Subject: Re: [PSUBS-MAILIST] Minn Kota Motors
> 
> graham
> 
> beware, endura series motors are freshwater motors so
> watch for corrision or they might end up failing,
> Minn kota do sea water series motors. little bit more
> costly but who want anything to fail.
> 
> Brent
> 
> --- Graham K <cryogenicz@dsl-only.net> wrote:
> > I purchased 2 Endura 50# Minn Kota Motors today, and
> > I was wondering how you
> > Remove the Composite pipe from the motor, and seal
> > up the Motors Wires from
> > the water? Any other Ideas would be Great!!
> > 
> > 
> > Thanks,
> > 
> > 
> > Graham Kuberski
> > 
> 
> 
> __________________________________________________
> Do You Yahoo!?
> Yahoo! - Official partner of 2002 FIFA World Cup
> http://fifaworldcup.yahoo.com
> 

Roger June
REJ and Company
rjune@fuse.net
513-300-1189