[Date Prev][Date Next] [Chronological] [Thread] [Top]

Re: [PSUBS-MAILIST] Reverse engineering

To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] Reverse engineering
From: Floridarobots@aol.com
Date: Tue, 4 Dec 2001 08:29:06 EST

Question..... What is the formula to calculate reverse engineering on a pressure hull ?

If a Co2 tank is rated for say 1000 PSI of outward pressure from the inside, what would it be rated for as far as pressure from the outside ? Sorry if this sounds like a dumb question, Im not sure if there is a calculation for this....
Tom

Follow-Ups:
- Re: [PSUBS-MAILIST] Reverse engineering
  - From: Coalbunny <coalbunny@onewest.net>
- Re: [PSUBS-MAILIST] Reverse engineering
  - From: Coalbunny <coalbunny@onewest.net>

Prev by Date: [PSUBS-MAILIST] Ambient pressure control
Next by Date: Re: [PSUBS-MAILIST] Reverse engineering
Index(es):
- Chronological
- Thread