[Date Prev][Date Next] [Chronological] [Thread] [Top]

Re: [PSUBS-MAILIST] CAD Programs

To: "Chris A. Henesy" <lurker@shadowtech.org>, "personal_submersibles@psubs.org" <personal_submersibles@psubs.org>
Subject: Re: [PSUBS-MAILIST] CAD Programs
From: "Sean T. Stevenson" <ststev@uniserve.com>
Date: Mon, 09 Jul 2001 13:10:12 -0700
In-Reply-To: <Pine.LNX.4.30.0107091442370.1503-100000@yakuza.shadowtech.org>

Most of the CAD packages I am familiar with are high end packages costing a few thousand dollars, but there is someone in my office who uses a somewhat cheaper package called TurboCAD.  Might 
be worth looking into.

-Sean

On Mon, 9 Jul 2001 14:46:19 -0400 (EDT), Chris A. Henesy wrote:

>
>Can someone offer soem advice on a decent CAD program to use for my sub
>design?  I don't know much about CAD programs (never used one).  I've
>heard of AutoCAD of course, but I'm not interested in anything costing
>$10000.  Any suggestions for a slightly less complicated/expensive
>program?
>
>Thanks!
>Chris
>
>P.S. - Extra super bonus points if there is a Linux version!
>

References:
- [PSUBS-MAILIST] CAD Programs
  - From: "Chris A. Henesy" <lurker@shadowtech.org>

Prev by Date: [PSUBS-MAILIST] CAD Programs
Next by Date: RE: [PSUBS-MAILIST] CAD Programs
Index(es):
- Chronological
- Thread