[Date Prev][Date Next]
[Chronological]
[Thread]
[Top]
Re: [PSUBS-MAILIST] Drawings was : axle through hull?
Not a FAQ but a Archive for CAD-Files (Drawings) in DWG or DXF -
format - maybe with small forward pictures (tumnails) in JPG format.
I can explain how a simple hull penetration work - but it is difficult
for a German/Swedish/France etc. to translate - much easier to use
a drawing !
(.. use Hull3.dxf with Conector23a.dwg and engine2.dxf and
ready is your selfmmade submarine (-plan)..)
Its relative easy to read all this technical stuff in english but much
harder
to find the right technical words for a foreign submadman.
Sorry Chris, some of the other boys will give you (maybe) an answer..
And most -maybe all - informations in the archive files.
Regards Carsten
Ray Keefer schrieb:
>
> Do we need a FAQ?
>
> Regards,
> Ray
> ------------- Begin Forwarded Message -------------
>
> To: <Ray@PSUBS.ORG>
> From: bluelamb <bluelamb@acepia.net.au>
> Subject: axle through hull?
> Date: Tue, 26 Sep 2000 19:48:36
> X-Mail-Gateway: BrowserExpress
> X-Real-Host-From: 139.134.23.66
>
> Hi Ray,
> love your site, i too have had a passion for subs for as long as i can remember.
> i'm finally thinking of building one, probably wet.
> i am wondering how to put electrical lines and drive lines through the hull
> whilst remaining watertight. any help would be greatly apreciated. i don't have
> an engineering background so there's a bit of a learning curve here!
> any help would be great thanks
> Chris
> Australia
>
> ------------- End Forwarded Message -------------