[Date Prev][Date Next]
[Chronological]
[Thread]
[Top]
[PSUBS-MAILIST] Accuarately assess contact surface stress distribution and magnitude
--------- Begin forwarded message ----------
Bill Ebner <bebner@gti.net>
Saturday, January 22, 2000 12:12 AM
Accurately assess contact surface stress distribution and
magnitude with new force indicating sensor film!
Dear Engineer:
I am writing to inform you of a new product of ours - a sensor film that
reveals the stress distribution and magnitude between any two surfaces
that
come in contact - by changing color. The intensity of the resultant
color
is quantifiable and enables you to determine precisely what the PSI is
at
any point on the contacting surfaces. This product is useful for
assessing
interfacial stresses that occur at gasketed and flanged interfaces, in
lamination presses, roller systems and heat sealers, during welding, in
materials testing and from impact forces.
If you would like a FREE product sample and literature please let me
know
and I will be sure to send it out immediately. Please be sure to include
an
approximate PSI range that you want to experiment with for the
application
you have in mind. Pressurex is available in five sample ranges. Please
choose one:
28 - 85 PSI
70 - 350 PSI
350 - 1400 PSI
1400 - 7100 PSI
7100 - 18,500 PSI
Also be sure to include your contact information (address, phone, fax,
etc.)
Thank you for your time.
Bill Ebner
Sensor Products Inc.
188 Rt. 10 Ste. 307
E. Hanover, NJ 07936 USA
http:\\www.fuji-prescale.com
ph 973.560.9092
fx 973.884.1699
This message is sent in compliance with the new email bill: SECTION 301.
Per Section 301, Paragraph (a) (2) (C) of S. 1618.
--------- End forwarded message ----------
________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.